Specifications

10-8 Network Domain Commands
set network-domain mode seed domain-name
CreatesaNetworkDomainbysettingthecurrentRoamAboutSwit chasaseeddeviceandnaming
theNetworkDomain.
Syntax
set network-domain mode seed domain-name net-domain-name
Defaults
None.
Mode
Enabled.
Usage
Beforeyouusethiscommand,thecurrentRoamAboutSwitchmusthaveitsIPaddresssetwith
thesetsystemip‐addresscommand.Afteryouenter thiscommand,NetworkDomaintrafficis
sentandreceivedfromthe specifiedIPaddress.
YoucanconfiguremultipleRoamAboutSwitchesasNetworkDomainseeds.Ifyou
dothis,you
mustidentifythemaspeersbyusingthesetnetworkdomainpeercommand.
Example
ThefollowingcommandcreatesaNetworkDomainnamedCaliforniawiththecurrent
RoamAboutSwitchasaseed:
RBT-8100# set network-domain mode seed domain-name California
success: change accepted.
Related Commands
• clearnetwork‐domainonpage 10‐2
• shownetwork‐domainonpage 10‐9
net‐domain‐name NameoftheNetworkDomain.Specifybetween1and16 characterswithno
spaces.