Specifications

RoamAbout Mobility System Software Command Line Reference 10-7
set network-domain peer
OnaNetworkDomainseed,configuresoneormoreRoamAboutSwitchesasredundantNetwork
Domainseeds.TheseedsinaNetworkDomainshareinformationabouttheVLANsconfigured
onthememberdevices,sothatalltheNetworkDomainseedshavethe samedatabaseofVLAN
information.
Syntax
set network-domain peer ip-addr
Parameters
Defaults
None.
Mode
Enabled.
Usage
ThiscommandmustbeenteredonanRoamAboutSwitchconfiguredasaNetworkDomainseed.
Example
ThefollowingcommandsetstheRoamAboutSwitchwithIPaddress192.168.9.254asapeerof
thisNetworkDomainseed:
RBT-8100# set network-domain peer 192.168.9.254
success: change accepted.
Related Commands
• clearnetwork‐domainonpage 10‐2
• shownetwork‐domainonpage 10‐9
ip‐addr IPaddressoftheNetworkDomainseedtospecifyasapeer,indotted
decimalnotation.