Specifications

RoamAbout Mobility System Software Command Line Reference 10-5
clear network-domain seed-ip
RemovesthespecifiedNetworkDomainseedfromtheRoamAboutSwitch’sconfiguration.When
youenterthiscommand,theNetworkDomainTCPconnectionsbetweentheRoamAboutSwitch
andthespecifiedNetworkDomainseedareclosed.
Syntax
clearnetwork‐domainseed‐ipip‐addr
Parameters
Defaults
None.
Mode
Enabled.
Usage
ThiscommandhasnoeffectiftheRoamAboutSwitchisnotconfiguredaspartofaNetwork
Domain,oriftheRoamAboutSwitchisnotconfiguredasamemberofaNetworkDomainthat
usesthespecifiedNetwork Domainseed.
Examples
ThefollowingcommandremovestheNetworkDomainseedwithIPaddress192.168.9.254from
theRoamAboutSwitch’sconfiguration:
RBT-8100# clear network-domain seed-ip 192.168.9.254
success: change accepted.
Related Commands
setnetwork‐domainmodememberseed‐iponpage 10‐6
ip‐addr IPaddressoftheNetworkDomainseedindotteddecimalnotation.