Specifications

RoamAbout Mobility System Software Command Line Reference 10-3
clear network-domain mode
RemovestheNetworkDomainseedormemberconfigurationfromtheRoamAboutSwitch.
Syntax
clear network-domain mode {seed | member}
Parameters
Defaults
None.
Mode
Enabled.
Usage
ThiscommandhasnoeffectiftheRoamAboutSwitchisnotconfiguredaspartofaNetwork
Domain.
Examples
ThefollowingcommandclearstheNetworkDomainmemberconfigurationfromtheRoamAbout
Switch:
RBT-8100# clear network-domain mode member
success: change accepted.
ThefollowingcommandclearstheNetworkDomainseedconfigurationfromtheRoamAbout
Switch:
RBT-8100# clear network-domain mode seed
success: change accepted.
Related Commands
• setnetwork‐domainmodememberseed‐iponpage 10‐6
• setnetwork‐domainmodeseeddomain‐nameonpage 10‐8
seed ClearstheNetworkDomainseedconfigurationfromtheRoamAbout
Switch.
member Clears theNetworkDomainmemberconfigurationfromthe
RoamAboutSwitch.