Specifications

10-2 Network Domain Commands
clear network-domain
ClearsallNetworkDomainconfigurationandinformationfromanRoamAboutSwitch,
regardlessofwhethertheRoamAboutSwitchisaseedoramemberofaNetworkDomain.
Syntax
clear network-domain
Defaults
None.
Mode
Enabled.
Usage
ThiscommandhasnoeffectiftheRoamAboutSwitchisnotconfiguredaspartofaNetwork
Domain.
Examples
ToclearaNetworkDomainfromanRoamAboutSwitchwithinthedomain,typethefollowing
command:
RBT-8100# clear network-domain
This will clear all network-domain configuration. Would you like to continue? (y/
n) [n] y
success: change accepted.
Related Commands
• setnetwork‐domainmodememberseed‐iponpage 10‐6
• setnetwork‐domainpeeronpage 10‐7
• setnetwork‐domainmodeseeddomain‐nameonpage 10‐8