Specifications

RoamAbout Mobility System Software Command Line Reference 8-63
Filter-Id = acl-999.in
Filter-Id = acl-999.out
user last-resort-guestssid
Vlan-Name = k2
user last-resort-any
Vlan-Name = foo
mac-user 01:02:03:04:05:06
usergroup eastcoasters
session-timeout = 99
Table 8‐2describesthefieldsthatcanappearinshowaaaoutput.
Table 8-2 show aaa Output
Output What it displays...
Default Values RADIUS default values for all parameters.
authport UDP port on the RAS for transmission of RADIUS authorization and authentication
messages. The default port is 1812.
acctport UDP port on the RAS for transmission of RADIUS accounting records. The default is
port 1813.
timeout Number of seconds the RAS waits for a RADIUS server to respond before
retransmitting. The default is 5 seconds.
acct-timeout Number of seconds the RAS waits for a RADIUS server to respond to an accounting
request before retransmitting. The default is 5 seconds.
retrans Number of times the RAS retransmits a message before determining a RADIUS
server unresponsive. The default is 3 times.
deadtime Number of minutes the RAS waits after determining a RADIUS server is
unresponsive before trying to reconnect with this server. During the dead time, the
RADIUS server is ignored by the RoamAbout switch. The default is 0 minutes.
key Shared secret key, or password, used to authenticate to a RADIUS server. The
default is no key.
author-pass Password used for outbound authentication to a RADIUS server, used in conjunction
with a last-resort username. The default is
nopassword.
Radius Servers Information about active RADIUS servers.
Server Name of each RADIUS server currently active.
Addr IP address of each RADIUS server currently active.
Ports UDP ports that the RAS uses for authentication messages and for accounting
records.
T/o Setting of timeouts on each RADIUS server currently active.
Tries Number of retransmissions configured for each RADIUS server currently active. The
default is 3 times.
Dead Length of time until the server is considered responsive again.
State Current state of each RADIUS server currently active:
• UP (operating)
• DOWN (unavailable)