Specifications

RoamAbout Mobility System Software Command Line Reference 8-61
set web-portal
GloballyenablesordisablesWebAAAonaRoamAboutswitch.
Syntax
set web-portal {enable | disable}
Parameters
Default
Enabled.
Mode
Enabled.
Usage
ThiscommanddisablesorreenablessupportforWebAAA.However,WebAAAhasadditional
configurationrequirements.Forinformation,seethe“ConfiguringAAAforNetworkUsers”
chapterintheRoamAboutMobilitySystemSoftwareConfigurationGuide.
Example
TodisableWebAAA,typethefollowingcommand:
RBT-8100# set web-portal disable
success: change accepted.
Related Commands
• clearauthenticationwebonpage 8 ‐9
• setservice‐profileauth‐fallthruonpage 11‐82
• setuseronpage 8‐55
enable EnablesWebAAAontheswitch.
disable DisablesWebAAAontheswitch.