Specifications

RoamAbout Mobility System Software Command Line Reference 8-31
set authentication dot1x
Configuresauthenticationanddefineshowandwhereitisperformedforspecif iedwirelessor
wiredauthenticationclientswhouseanIEEE 802.1Xauthenticationprotocoltoaccessthenetwork
throughtheRAS.
Syntax
set authentication dot1x {ssid ssid-name | wired} user-glob [bonded] protocol
method1 [method2] [method3] [method4]
Parameters
ssidssid‐name SSIDnametowhichthisauthentica tionruleapplies.Toapplytheruletoall
SSIDs,typeany.
wired Appliesthisauthentication rulespecificallytousersconnectedtoawired
authenticationport.
user‐glob Asingleuserorasetofuserswith802.1Xnetworkaccess.
Specifyausername,usethe
double‐asteriskwildcardcharacter(**)tospecify
allusernames,orusethesingle‐asteriskwildcardcharacter(*)tospecifyaset
ofusernamesuptoorfollowingthefirstdelimitercharacter—eitheranatsign
(@)oraperiod(.).(Fordetails,see“UserGlobs”onpage 1‐3.)
bonded EnablesBonded
Auth™(bondedauthentication).Whenthisfeatureis
enabled,MSSauthenticatestheuseronlyifthemachinetheuserisonhas
alreadybeenauthenticated.