Specifications

8-24 AAA Commands
set accounting {dot1x | mac | web | last-resort}
Setsupaccountingservicesforspecifiedwirelessuserswithnetworkaccess,anddefinesthe
accountingrecordsandwheretheyaresent.
Syntax
set accounting {dot1x | mac | web} {ssid ssid-name | wired} {user-glob |
mac-addr-glob} {start-stop | stop-only} method1 [method2] [method3] [method4]
Parameters
dot1x Userswithnetworkaccessthrough theRoamAboutSwitchwhoare
authenticatedby802.1X.
mac UserswithnetworkaccessthroughtheRoamAboutSwitchwhoare
authenticatedbyMACauthentica tion.
web UserswithnetworkaccessthroughtheRoamAboutSwitchwhoare
authenticatedbyWebAAA.
last‐resort UserswithnetworkaccessthroughtheRoamAboutSwitchwho
are
authenticatedwithlimitedaccess.
ssidssid‐name SSIDnametowhichthisaccountingruleapplies.Toapplytheruletoall
SSIDs,typeany.
wired Appliesthisaccountingrulespecificallytouserswhoareauthenticatedon
awiredauthenticationport.
user‐glob Singleuserorsetofuserswithadministrativeaccessor
networkaccess.
Specifyausername,usethedouble‐asteriskwildcardcharacter(**)to
specifyallusernames,orusethesingle‐asteriskwildcardcharacter(*)to
specifyasetofusernamesuptoorfollowingthefirstdelimitercharacter—
eitheranatsign(@)oraperiod(.).(Fordetails,see“
UserGlobs”on
page 1‐3.)
Note: This option does not apply if mac or last-resort is specified. For mac, specify
a mac-addr-glob.
mac‐addr‐glob AsingleuserorsetofuserswithaccessviaaMACaddress.SpecifyaMAC
address,orusethewildcard(*)charactertospecifyasetofMACaddresses.
(Fordetails,see“MACAddressGlobs”onpage 1‐4.)
Thisoptionappliesonlywhenmacisspecified.
start‐
stop Sendsaccountingrecordsatthestartandendofanetworksession.
stop‐only Sendsaccountingrecordsonlyattheendofanetworksession.