Specifications

7-98 IP Services Commands
telnet
OpensaTelnetclientsessionwitharemotedevice.
Syntax
telnet {ip-addr | hostname} [port port-num]
Parameters
Defaults
MSSattemptstoestablishTelnetconnectionswithTCPport23bydefault.
Mode
Enabled.
Usage
ToendaTelnetsessionfromtheremotedevice,pressCtrl+tortypeexitinthemanagement
sessionontheremotedevice.Toendaclientsessionfromthe localdevice,usetheclearsessions
telnetclientcommand.
IftheconfigurationoftheRoamAboutswitchfromwhichyouenterthetelnet
commandhasan
ACLthatdeniesTelnetclienttraffic,theACLalsodeniesaccessbythetelnetcommand.
Example
Inthefollowingexample,anadministratorestablishesaTelnetsessionwithanotherRoamAbout
switchandentersacommandontheremoteswitch:
RBT-8100# telnet 10.10.10.90
Session 0 pty tty2.d Trying 10.10.10.90...
Connected to 10.10.10.90
Disconnect character is '^t'
Copyright (c) 2002, 2003
Enterasys Networks, Inc.
Username: username
Password: password
RBT-8100-remote> show vlan
Admin VLAN Tunl Port
VLAN Name Status State Affin Port Tag State
---- ---------------- ------ ----- ----- ---------------- ----- -----
1 default Up Up 5
1 none Up
3 red Up Up 5
ip‐addr IPaddressoftheremotedevice.
hostname Hostnameoftheremotedevice.
portport‐num TCPportnumberonwhichtheTCPserverontheremotedevicelistensfor
Telnetconnections.