Specifications

7-88 IP Services Commands
ClientRoamingTraps YES
AutoTuneRadioPowerChangeTraps YES
AutoTuneRadioChannelChangeTraps YES
CounterMeasureStartTraps YES
CounterMeasureStopTraps YES
ClientDot1xFailureTraps YES
Community Access Community Name
---------------- --------------
read-only public
read-write private
Table 7‐12describesthefieldsinthisdisplay.
Related Commands
• setipsnmpserveronpage 7 ‐36
• setporttraponpage 4‐25
• setsnmpcommunityonpage 7‐44
• setsnmptraponpage 7‐58
• setsnmptrapreceiveronpage 7‐59
• setsystemcontactonpage 3 ‐15
• setsystemlocationonpage 3‐21
• setsystemnameonpage 3‐22
Table 7-12 Output for show snmp configuration
Output What it displays...
Snmp agent is State of the SNMP agent on the switch:
System Name String configured by the set system name command.
System location String configured by the set system location command.
System contact String configured by the set system contact command.
System description RoamAbout switch model.
Trap Receiver IP address of each trap receiver.
Trap Name SNMP traps supported by MSS.
Enabled State of each trap:
Community Access Type of access for an SNMP community.
Community Name SNMP community name.