Specifications

RoamAbout Mobility System Software Command Line Reference 7-87
show snmp configuration
ThiscommandisdeprecatedinMSSVersion4.0. Usetheshowsnmpstatuscommandinstead.
ShowsSNMPsettingsonaRoamAboutswi tch.
Syntax
show snmp configuration
Parameters
None.
Defaults
None.
Mode
All.
Example
TodisplaySNMPsettingsonaRoamAboutswitch,typethefollowingcommand:
RBT-8100# show snmp configuration
Snmp agent is enabled
System Name: RBT-8100
System location:
System contact:
Trap Name Enabled
---------------------------------- -------
LinkDownTraps YES
LinkUpTraps YES
AuthenTraps YES
DeviceFailTraps YES
DeviceOkayTraps YES
PoEFailTraps YES
APTimeoutTraps YES
APBootTraps YES
MobilityDomainJoinTraps YES
MobilityDomainTimeoutTraps YES
MichaelMICFailureTraps YES
RFDetectRogueAPTraps YES
RFDetectAdhocUserTraps YES
RFDetectRogueDisappearTraps YES
ClientAuthenticationFailureTraps YES
ClientAuthorizationFailureTraps YES
ClientAssociationFailureTraps YES
ClientAuthorizationSuccessTraps YES
ClientClearedTraps YES
ClientDeAssociationTraps YES