Specifications

7-84 IP Services Commands
show ip telnet
Displaysinformationaboutthe Telnetmanagementport.
Syntax
show ip telnet
Parameters
None.
Defaults
None.
Mode
All.
Example
ThefollowingcommandshowsthestatusandportnumberfortheTelnetmanagementinterface
totheRoamAboutswitch:
RBT-8100> show ip telnet
Server Status Port
----------------------------------
Enabled 23
Table 7‐10describesthefieldsinthisdisplay.
Related Commands
• cleariptelnetonpage 7‐9
• setiphttpsserveronpage 7‐33
• setiptelnetonpage 7‐39
• setiptelnetserveronpage 7‐40
• showiphttpsonpage 7‐80
Table 7-10 Output for show ip telnet
Output What it displays...
Server Status State of the HTTPS server:
• Enabled
•Disabled
Port TCP port number on which the RoamAbout switch listens for Telnet
management traffic.