Specifications

RoamAbout Mobility System Software Command Line Reference 7-75
show interface
DisplaystheIPinterfacesconfiguredontheRoamAboutswitch.
Syntax
show interface [vlan-id]
Parameters
Defaults
IfyoudonotspecifyaVLANID,interfacesforallVLANsaredisplayed.
Mode
All.
Usage
TheIPinterfacetableflagsanaddressassignedbyaDHCPserverwithanasterisk(*).
Example
ThefollowingcommanddisplaysalltheIPinterfacesconfiguredonaRoa mAboutswitch:
RBT-8100# show interface
VLAN Name Address Mask Enabled State RIB
---- --------------- --------------- --------------- ------- ----- ---------
1 default 10.10.10.10 255.255.255.0 YES Up ipv4
2 mauve 10.10.20.10 255.255.255.0 NO Down ipv4
4 corpvlan *10.3.1.110 255.255.255.0 YES Up ipv4
Table 7‐5describesthefieldsinthisdisplay.
vlan‐id VLANnameornumber.
Table 7-5 Output for show interface
Output What it displays...
VLAN VLAN number
Name VLAN name
Address IP address
Mask Subnet mask
Enabled Administrative state:
• YES (enabled)
• NO (disabled)