Specifications

7-70 IP Services Commands
show dhcp-client
DisplaysDHCPclientinformationforallVLANs.
Syntax
show dhcp-client
Parameters
None.
Defaults
None.
Mode
All.
Example
ThefollowingcommanddisplaysDHCPclientinformation:
RBT-8100# show dhcp-client
Interface: corpvlan(4)
Configuration Status: Enabled
DHCP State: IF_UP
Lease Allocation: 65535 seconds
Lease Remaining: 65532 seconds
IP Address: 10.3.1.110
Subnet Mask: 255.255.255.0
Default Gateway: 10.3.1.1
DHCP Server: 10.3.1.4
DNS Servers: 10.3.1.29
DNS Domain Name: mycorp.com
Table 7‐2describesthefieldsinthisdisplay.
Table 7-2 Output for show dhcp-client
Output What it displays...
Interface VLAN name and number.
Configuration Status Status of the DHCP client on this VLAN:
• Enabled
•Disabled
DHCP State State of the IP interface:
•IF_UP
•IF_DOWN
Lease Allocation Duration of the address lease.
Lease Remaining Number of seconds remaining before the address lease expires.
IP Address IP address received from the DHCP server.