Specifications

7-68 IP Services Commands
show arp
DisplaystheARPtable.
Syntax
show arp [ip-addr]
Parameters
Defaults
IfyoudonotspecifyanIPaddress,thewholeARPtableisdisplayed.
Mode
All.
Example
ThefollowingcommanddisplaysARPentries:
RBT-8100# show arp
ARP aging time: 1200 seconds
Host HW Address VLAN Type State
------------------------------ ----------------- ----- ------- --------
10.5.4.51 00:0b:0e:02:76:f5 1 DYNAMIC RESOLVED
10.5.4.53 00:0b:0e:02:76:f7 1 LOCAL RESOLVED
Table 7‐1describesthefieldsinthisdisplay.
ip‐addr IPaddress.
Table 7-1 Output for show arp
Field Description
ARPagingtime Numberofsecondsadynam icentrycanremainunusedbeforeMSS
removestheentryfromtheARPtable.
Host IP address,hostname,oralias.
HWAddress MACaddressmappedtotheIPaddress,hostname,oralias.
VLAN VLANtheentryisfor.