Specifications

RoamAbout Mobility System Software Command Line Reference 7-67
set timezone
Setsthenumberofhours,andoptionallythenumberofminutes,thattheRoamAboutswitch’s
real‐timeclockisoffsetfromCoordinatedUniversalTime(UTC).Thesevaluesarealsousedby
NetworkTimeProtocol(NTP),ifitisenabled.
Syntax
set timezone zone-name {-hours [minutes]}
Parameters
Defaults
Ifthiscommandisnotused,thenthedefaulttimezoneisUTC.
Mode
Enabled.
Example
TosetthetimezoneforPacificStandardTime(PST),typethefollowingcommand:
RBT-8100# set timezone PST -8
Timezone is set to 'PST', offset from UTC is -8:0 hours.
Related Commands
• clearsummertimeonpage 7‐17
• cleartimezoneonpage 7‐19
• setsummertimeonpage 7 ‐63
• settimedateonpage 7‐66
• showsummertimeonpage 7‐95
• showtimedateonpage 7‐96
• showtimezoneonpage 7‐97
zone‐name Timezonenameofupto32alphabeticcharacters.Youcanuseastandard
nameoranynameyoulike.
‐ Minustimetoindicatehours(andminutes)tobesubtractedfromUTC.
Otherwise,hoursandminutesareaddedbydefault.
hours NumberofhourstoaddorsubtractfromUTC.
minutes NumberofminutestoaddorsubtractfromUTC.