Specifications

7-66 IP Services Commands
set timedate
SetsthetimeofdayanddateontheRoamAboutswitch.
Syntax
set timedate {date mmm dd yyyy [time hh:mm:ss]}
Parameters
Defaults
None.
Mode
Enabled.
Usage
Thedayofweekisautomaticallycalculatedfromthedayyouset.Thetime displayedbytheCLI
afteryoutypethecommandmightbeslightlylaterthanthetimeyouenterduetotheinterval
betweenwhenyoupressEnterandwhentheCLIreadsand displaysthenewtime
anddate.
Configuresummertimebeforeyousetthetimeanddate.Otherwise,summertime’sadjustmentof
thetimewillmakethetimeincorrect,ifthedateiswithinthesummertimeperiod.
Example
ThefollowingcommandsetsthedatetoMarch13,2003andtimeto11:11:12:
RBT-8100# set timedate date feb 29 2004 time 23:58:00
Time now is: Sun Feb 29 2004, 23:58:02 PST
Related Commands
• clearsummertimeonpage 7‐17
• cleartimezoneonpage 7‐19
• setsummertimeonpage 7 ‐63
• settimezoneonpage 7‐67
• showsummertimeonpage 7‐95
• showtimedateonpage 7‐96
• showtimezoneonpage 7‐97
datemmmddyyyy Systemdate:
• mmm—month.
• dd—day.
• yyyy—year.
timehh:mm:ss Systemtime,in
hours,minutes,andseconds.