Specifications

RoamAbout Mobility System Software Command Line Reference 7-57
set snmp security
SetstheminimumlevelofsecurityMSSrequiresforSNMPmessageexchanges.
Syntax
set snmp security {unsecured | authenticated | encrypted | auth-req-unsec-notify}
Parameters
Defaults
Bydefault,MSSallowsnonsecure(unsecured)SNMPmessageexchanges.
Mode
Enabled.
Usage
SNMPv1andSNMPv2c donotsupportauthenticationorencryption.IfyouplantouseSNMPv1
orSNMPv2c,leavetheminimumlevelofSNMPsecuritysettounsecured.
Example
ThefollowingcommandsetstheminimumlevelofSNMPsecurityallowedtoauthenticationand
encryption:
RBT-8100# set snmp security encrypted
success: change accepted.
Related Commands
• setipsnmpserveronpage 7 ‐36
• setsnmpcommunityonpage 7‐44
• setsnmpnotifytargetonpage 7‐46
• setsnmpprofileonpage 7‐51
• setsnmpprotocolonpage 7‐56
• setsnmpusmonpage 7 ‐60
• showsnmpstatusonpage 7‐93
unsecured SNMPmessageexchangesarenotsecure.
Thisistheonlyvaluesupported
forSNMPv1andSNMPv2c.
authenticated SNMPmessageexchangesareauthenticatedbutarenotencrypted.
encrypted SN MPmessageexchangesareauthenticatedandencrypted.
auth‐req‐unsec‐
notify
SNMPmessageexchangesareauthenticatedbutarenotencrypted,and
notificationsareneitherauthenticatednorencrypted.