Specifications

RoamAbout Mobility System Software Command Line Reference 7-41
set ntp
EnablesordisablestheNTPclientonaRoamAboutswitch.
Syntax
set ntp {enable | disable}
Parameters
Defaults
TheNTPclientisdisabledbydefault.
Mode
Enabled.
Usage
IfNTPisconfiguredonasystemwhosecurrenttimediffersfromtheNTPservertimebymore
than10minutes,convergenceoftheRoamAboutswitchtimecantakemanyNTPupdateintervals.
EnterasysNetworksrecommendsthatyousetthetimemanuallytotheNTPservertimebefore
enablingNTPto
avoidasignificantdelayinconvergence.
Example
ThefollowingcommandenablestheNTPclient:
RBT-8100# set ntp enable
success: NTP Client enabled
Related Commands
• clearntpserveronpage 7‐10
• clearntpupdate‐intervalonpage 7 ‐11
• setntpserveronpage 7‐42
• setntpupdate‐intervalonpage 7‐43
• showntponpage 7‐85
enable EnablestheNTPclient.
disable DisablestheNTPclient.