Specifications

7-40 IP Services Commands
set ip telnet server
EnablestheTelnetserveronaRoamAboutswitch.
Syntax
set ip telnet server {enable | disable}
Parameters
Defaults
TheTelnetserverisdisabledbydefault.
Mode
Enabled.
Usage
ThemaximumnumberofTelnetsessionssupportedonaRoamAboutswitchiseight.IfSSHis
alsoenabled,theswitchcanhaveuptoeightTelnetorSSHsessions,inanycombination,andone
consolesession.
Example
ThefollowingcommandenablestheTelnetserveronaRoamAboutswitch:
RBT-8100# set ip telnet server enable
success: change accepted.
Related Commands
• cleariptelnetonpage 7‐9
• setiphttpsserveronpage 7‐33
• setiptelnetonpage 7‐39
• showiphttpsonpage 7‐80
• showiptelnetonpage 7‐84
Caution: If you disable the Telnet server, Telnet access to the RoamAbout switch is also disabled.
enable EnablestheTelnetserver.
disable DisablestheTelnetserver.