Specifications

7-38 IP Services Commands

set ip ssh server

DisablesorreenablestheSSHserveronaRoamAboutswitch.

Syntax

set ip ssh server {enable | disable}

Parameters

Defaults

TheSSHserverisenabledbydefault.

Mode

Enabled.

Usage

SSHrequiresanSSHauthenticationkey.YoucangenerateoneorallowMSStogenerate one.The

firsttimeanSSHclientattemptstoaccesstheSSHserveronaRoamAboutSwitch,theswitch

automaticallygeneratesa1024‐byteSSHkey.If youwanttousea2048‐bytekeyinstead,

usethe

cryptogeneratekeyssh2048commandtogenerateone.

ThemaximumnumberofSSHsessionssupportedonaRoamAboutswitchiseight.IfTelnetis

alsoenabled,theswitchcanhaveuptoeightTelnetorSSHsessions,inanycombination,andone

Consolesession.

Related Commands

• cryptogeneratekeyonpage 15‐6

• setipsshonpage 7‐37

• setipsshserveronpage 7‐38

Caution: If you disable the SSH server, SSH access to the RoamAbout switch is also disabled.

enable EnablestheSSHserver.

disable DisablestheSSHserver.