Specifications

RoamAbout Mobility System Software Command Line Reference 7-37
set ip ssh
ChangestheTCPportnumberonwhichaRoamAboutswitchlistensforSecureShell(SSH)
managementtraffic.
Syntax
set ip ssh port port-num
Parameters
Defaults
ThedefaultSSHportnumberis22.
Mode
Enabled.
Example
ThefollowingcommandchangestheSSHportnumberonaRoamAboutswitchto6000:
RBT-8100# set ip ssh port 6000
success: change accepted.
Related Commands
• setipsshserveronpage 7‐38
• setipsshserveronpage 7‐38
• setipsshserveronpage 7‐38
Caution: If you change the SSH port number from an SSH session, MSS immediately ends the
session. To open a new management session, you must configure the SSH client to use the new
TCP port number.
port‐num TCPportnumber.