Specifications

7-28 IP Services Commands
set interface status
AdministrativelydisablesorreenablesanIPinterface.
Syntax
set interface vlan-id status {up | down}
Parameters
Defaults
IPinterfacesareenabledbydefault.
Mode
Enabled.
Example
ThefollowingcommanddisablestheIPinterfaceonVLANmauve:
RBT-8100# set interface mauve status down
success: set interface mauve to down
Related Commands
• clearinterfaceonpage 7‐4
• setinterfaceonpage 7‐24
• showinterfaceonpage 7‐75
vlan‐id VLANnameornumber.
up Enablestheinterface.
down Disablestheinterface.