Specifications

RoamAbout Mobility System Software Command Line Reference 7-27
•Defaultrouter—Ifthisoptionisnotsetwiththesetinterfacedhcp‐servercommand’sdefault‐
routeroption,theMSSDHCPservercanusethevaluesetbythesetiproutecommand.A
defaultrouteconfiguredby setiproutecanbeusediftherouteisintheDHCPclient’s
subnet.
Otherwise,theMSSDHCPserverdoesnotspecifyarouteraddress.
Example
ThefollowingcommandenablestheDHCPserveronVLANred‐vlantoserveaddressesfromthe
192.168.1.5to192.168.1.25range:
RBT-8100# set interface red-vlan ip dhcp-server enable start 192.168.1.5 stop
192.168.1.25
success: change accepted.
Related Commands
• setipdnsdomainonpage 7‐31
• setipdnsserveronpage 7‐32