Specifications

RoamAbout Mobility System Software Command Line Reference 7-11
clear ntp update-interval
ResetstheNTPupdateintervaltothedefaultvalue.
Syntax
clear ntp update-interval
Parameters
None.
Defaults
ThedefaultNTPupdateintervalis64seconds.
Mode
Enabled.
Example
ToresettheNTPintervaltothedefaultvalue,typethefollowingcommand:
RBT-8100# clear ntp update-interval
success: change accepted.
Related Commands
• clearntpserveronpage 7‐10
• setntponpage 7‐41
• setntpserveronpage 7‐42
• setntpupdate‐intervalonpage 7‐43
• showntponpage 7‐85