Specifications

7-10 IP Services Commands
clear ntp server
RemovesanNTPserverfromaRoamAboutswitchconfiguration.
Syntax
clear ntp server {ip-addr | all}
Parameters
Defaults
None.
Mode
Enabled.
Example
ThefollowingcommandremovesNTPserver192.168.40.240fromaRoamAboutswitch
configuration:
RBT-8100# clear ntp server 192.168.40.240
success: change accepted.
Related Commands
• clearntpupdate‐intervalonpage 7 ‐11
• setntponpage 7‐41
• setntpserveronpage 7‐42
• setntpupdate‐intervalonpage 7‐43
• showntponpage 7‐85
ip‐addr IPaddressoftheservertoremove,indotteddecimalnotation.
all RemovesallNTPserversfromtheconfiguration.