Specifications

RoamAbout Mobility System Software Command Line Reference 5-25
Related Commands
• clearvlanonpage 5‐6
• setsecurityl2‐restrictonpage 5‐10
• setvlanportonpage 5‐12
• setvlantunnel‐affinityonpage 5‐13
Table 5-6 Output for show vlan config
Output What It Displays...
VLAN VLAN number.
Name VLAN name.
Admin Status Administrative status of the VLAN:
Down—The VLAN is disabled.
Up—The VLAN is enabled.
VLAN State Link status of the VLAN:
Down—The VLAN is not connected.
Up—The VLAN is connected.
Tunl Affin Tunnel affinity value assigned to the VLAN.
Port Member port of the VLAN. The port can be a physical port or a virtual port.
Physical ports are 10/100 Ethernet or gigabit Ethernet ports on the switch,
and are listed by port number.
Virtual ports are tunnels to other switches in a Mobility Domain, and are listed
as follows: t:ip-addr, where ip-addr is the system IP address of the
RoamAbout switch at the other end of the tunnel.
This field can include AP access ports and wired authentication ports,
because MSS dynamically adds these ports to a VLAN when handling user
traffic for the VLAN.
Tag Tag value assigned to the port.
Port State Link state of the port:
Down—The port is not connected.
Up—The port is connected.