Specifications

5-18 VLAN Commands
show roaming station
Displaysalistofthestationsroamingtothe RoamAboutswitchthroughaVLANtunnel.
Syntax
show roaming station [vlan vlan‐id] [peer ip‐addr]
Parameters
Defaults
None.
Mode
Enabled.
Usage
Theoutputdisplaysroamingstationswithintheprevious1second.
Example
TodisplayallstationsroamingtotheRoamAboutswitch,typethefollowingcommand:
RBT-8100# show roaming station
User Name Station IP Addr Old AP MAC VLAN State
----------------------- --------------- ----------------- -------------- ------
redsqa 0.0.0.0 00:00:00:00:00:00 violet Up
Table 5‐2describesthefieldsinthedisplay.
vlan vlan‐id OutputisrestrictedtostationsusingthisVLAN.
peer ip‐addr OutputisrestrictedtostationstunnellingthroughthispeerRoamAbout
switchintheMobilityDomain.
Table 5-2 Output for show roaming station
Output What It Displays...
User Name Name of the user. This is the name used for authentication. The name resides in a
RADIUS server database or the local user database on a RoamAbout switch.
Station IP Addr IP address of the user device.
VLAN Name of the VLAN to which the RADIUS server or RoamAbout switch local user
database assigned the user.