Specifications

RoamAbout Mobility System Software Command Line Reference 5-13
set vlan tunnel-affinity
ChangesaRoamAboutswitch’spreferabilitywithinaMobilityDomainfortunnelingusertraffic
foraVLAN.WhenauserroamstoaRoamAboutswitchthatisnotamemberoftheuser’sVLAN,
theswitchcanforwardtheusertrafficbytunnelingtoanotherRoamAboutswitchthatisa
memberof
theVLAN.
Syntax
set vlan vlan‐id tunnel-affinity num
Parameters
Defaults
EachVLANonaRoamAboutswitch’snetworkportshasanaffinityvalueof5bydefault.
Mode
Enabled.
Usage
Increasingaswitch’saffinityvalueincreasestheswitch’spreferabilityforforwardingusertraffic
fortheVLAN.
IfmorethanoneRoamAboutswi tch hasthehighestaffinityvalue,MSSrandomlyselectsoneof
theswitchesforthetunnel.
Example
ThefollowingcommandchangestheVLANaffinityforVLANbeigeto10:
RBT-8100# set vlan beige tunnel-affinity 10
success: change accepted.
Related Commands
• showroamingvlanonpage 5‐20
• showvlanconfigonpage 5‐24
vlan‐id VLANnameornumber.
tunnel‐affinity
num
PreferenceofthisswitchforforwardingusertrafficfortheVLAN.Youcan
specifyavaluefrom1through10.Ahighernumberindicatesagreater
preference.