Specifications

4-32 Port Commands
Related Commands
• clearporttypeonpage 4‐8
• setportonpage 4‐17
• setportnameonpage 4‐21
• setportnegotiationonpage 4‐22
• setportspeedonpage 4 ‐24
• setporttypewired‐authonpage 4‐26
Table 4-8 Output for show port status
Output What It Displays...
Port Port number.
Name Port name. If the port does not have a name, the port number is listed.
Admin Administrative status of the port:
up—The port is enabled.
down—The port is disabled.
Oper Operational status of the port:
up—The port is operational.
down—The port is not operational.
Config Port speed configured on the port:
10—10 Mbps.
100—100 Mbps.
1000—1000 Mbps.
auto—The port sets its own speed.
Actual Speed and operating mode in effect on the port.
Type Port type:
access point — Access Point port
network—Network port
wa—Wired authentication port
Media Link type:
10/100BaseTX—10/100BASE-T.
GBIC—1000BASE-SX or 1000BASE-LX GBIC.
1000BaseT—1000BASE-T.
No connector—GBIC slot is empty.