Specifications

Radio Interface
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-63
Toviewthe current802.11aradiosettings,usetheshowinterfacewirelessacommand.
Example
RoamAbout 4102#show interface wireless a
Wireless Interface Information
=========================================================================
----------------Identification-------------------------------------------
Description : "RD-AP4102"
SSID : r&d
Channel : 40
Status : Enable
----------------Antenna--------------------------------------------------
Antenna Select : Fixed
Fixed Antenna Control : Diversity
Antenna ID : 0x0000(Integrated antenna)
Ack-TimeOut : 0 us
----------------802.11 Parameters----------------------------------------
Transmit Power : FULL (13 dBm)
Automated Data Rate : ENABLED
Max Station Data Rate : 54Mbps
Multicast Data Rate : 6Mbps
Fragmentation Threshold : 2346 bytes
RTS Threshold : 2347 bytes
Beacon Interval : 100 TUs
Association Timeout Interval : 5 Mins
DTIM Interval : 2 beacons
Maximum Association : 255 stations
Native VLAN ID : 1
Software Retry Mode : ENABLED
Software Retry No : 3
Hardware Retry No : 1
----------------Security-------------------------------------------------
Secure Access : ENABLED
Multicast cipher : WEP
Unicast cipher : AES-TKIP
PMKSA Lifetime : 720 minutes
WPA clients : NOT SUPPORTED
WPA Key Mgmt Mode : DYNAMIC
WPA PSK Key Type : HEX
Encryption : DISABLED
Default Transmit Key : 1
Common Static Keys : Key 1: EMPTY Key 2: EMPTY
Key 3: EMPTY Key 4: EMPTY
Pre-Authentication : Disabled
Authentication Type : OPEN
----------------Authentication Parameters---------------------------------
802.1X : DISABLED
Broadcast Key Refresh Rate : 0 min
Session Key Refresh Rate : 0 min
802.1X Session Timeout Value : 60 min
----------------Quality of Service---------------------------------------
WMM Mode : SUPPORTED
WMM BSS Parameters
AC0(Best Effort) : logCwMin: 4 logCwMax: 10 AIFSN: 3
Admission Control: No
TXOP Limit: 0.000 ms
AC1(Background) : logCwMin: 4 logCwMax: 10 AIFSN: 7