Specifications

SNMP
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-31
• SNMPallowsyoutoenableordisableSNMPmanagementaccessandalsoenablestheaccess
pointtosendSNMPtraps(notifications).SNMPmanagementisenabledbydefault.
• SNMPv1allowsyoutoenableordisablemanagementaccessfromSNMPv1clients.
• CommunityName(ReadOnly)definestheSNMPcommunityaccessstringthat
hasread‐only
access.AuthorizedmanagementstationsareonlyabletoretrieveMIBobjects.Default:public,
maximumlength:23characters,casesensitive
• CommunityName(Read/Write)definestheSNMPcommunityaccessstringthathasread/write
access.AuthorizedmanagementstationsareabletobothretrieveandmodifyMIBobjects.
Default:private,maximumlength:
23characters,casesensitive
• TrapDestination(1to4)enablesordisableseachofthefouravailabletrapdestinations.If
enabled,youmustdefinethetrapdestinationusingtheIPaddressandcommunityname
fields.
• TrapDestinationIPAddress(1to4)specifiestherecipientofSNMPnotifications.Enterthe
IP
addressorthehostname.HostName: 1to20characters
• TrapDestinationCommunityNamespecifiesthecommunitystringsentwiththenotification
operation.Default:public,maximumlength:23characters,casesensitive
• TrapConfig urationallowsselectionofspecificSNMPnotificationstosend.Table 4‐3liststhe
availablenotifications.
Table 4-3 SNMP Notifications
Notification Description
sysSystemUp The access point is up and running.
sysSystemDown The access point is about to shutdown and reboot.
sysRadiusServerChanged The access point was changed from the primary RADIUS
server to the secondary, or from the secondary to the primary.
dot11StationAssociation A client station successfully associated with the access point.
dot11StationReAssociation A client station successfully re-associated with the access
point.
dot11StationAuthentication A client station was successfully authenticated.
dot11StationRequestFail A client station failed association, re-association, or
authentication.
dot1xAuthFail A 802.1x client station failed RADIUS authentication.
dot1xMacAddrAuthSuccess A client station successfully authenticated its MAC address
with the RADIUS server.
dot11InterfaceAFail The 802.11a interface failed.
sntpServerFail The access point failed to set the time from the configured
SNTP server.
dot1xMacAddrAuthFail A client station failed MAC address authentication with the
RADIUS server.
dot1xAuthNotInitiated A client station did not initiate 802.1x authentication.
dot1xAuthSuccess A 802.1x client station successfully authenticated by the
RADIUS server.