Specifications

RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-1

Advanced Configuration

Overview

Thischapterpresentsadvancedconfigurationinformationorganizedaccordingtothestructureof

thewebinterfaceforeasyreference.

EnterasysNetworksrecommendsthatyouconfigureausernameandpasswordtocontrol

managementaccesstothisdeviceasthefirstadvancedconfigurationstep(referto

Administration onpage 4‐39).

Table 4‐1liststhe

configurationoptionsandbriefdescriptions.

Using the Web Interface

YoumustclickontheApplybuttonatthebottomofeachWebinterfacepagefortheconfiguration

changesonthatpagetotakeeffect.

Using the Command Line Interface (CLI)

ForadescriptionofhowtousetheCLI,refertotheEnterasysRoamAboutRBT‐4102WirelessAccess

PointCommandLineInterfaceReferenceGuide.

Table 4-1 Advanced Configuration

Menu Description Page

Identification Specifies the system name, location, and contact. 4-3

TCP / IP Settings Enables DHCP, or allows you to configure the IP address, subnet

mask, gateway, and domain name servers.

4-5

RADIUS Configures the RADIUS server for wireless client authentication and

accounting.

4-11

Authentication Configures the access point as an 802.1x authentication supplicant

with the network.

4-15

Filter Control Filters communications between wireless clients, access to the

management interface from wireless clients, and traffic matching

specific Ethernet protocol types.

4-18

CDP Settings Configures the AP to use Cabletron Discovery Protocol (CDP). 4-24

Rogue AP Detection Scans the airwaves and collects information about access points in

the area.

4-27