Specifications

Radio Interface
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-75
Using the CLI to Configure Virtual APs
Fromtheglobalconfigurationmode,entertheinterfacewirelessacommandtoaccessthe802.11a
radiointerface,ortheinterfacewirelessgcommandtoaccessthe802.11gradiointerface.Usethe
vap[1‐7]commandtospecifytheVAPyouwanttoconfigureandtoenterVAPmode.SettheVAP

SSIDusingthessidcommandand,ifrequired,configureanamefortheVAPusingthe
descriptioncommand.Usethenative‐vlanidcommandtospecifythenativeVLANIDforthis
VAP.EnablesecureaccessforthisVAPwiththesecure‐accesscommand.Setanyotherparameters
asrequired.Specifywhether
clientsassociatedwiththisVAPcanestablishwireless
communicationswitheachotherthroughtheAPwiththeibss‐relaycommand.Specifythe
maximumnumberofclientsthatcanassociatewiththeVAPusingthemax‐associationcommand.
Examples
RoamAbout 4102#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 4102(config)#interface wireless g
Enter Wireless configuration commands, one per line.
RoamAbout 4102(if-wireless g)#vap 1
RoamAbout 4102(if-wireless g: VAP[1])#ssid r&d-a-V1
RoamAbout 4102(if-wireless g: VAP[1])#des AP-a-V1
RoamAbout 4102(if-wireless g: VAP[1])#native-vlanid 20
RoamAbout 4102(if-wireless g: VAP[1])#secure-access
RoamAbout 4102(if-wireless g: VAP[1])#ibss-relay
RoamAbout 4102(if-wireless g: VAP[1])#max-association 32
RoamAbout 4102(if-wireless g: VAP[1])#exit
RoamAbout 4102#