User`s guide

Access Web Management
2-2
Access Web Management
To access the RoamAbout R1’s management interface, enter the IP address of the
RoamAbout R1 in your Web browser (http://192.168.2.1). The Login screen prompts you
for a password. The default password is password.
The Main page links are used to navigate to other pages that display configuration
parameters and statistics. You can define system parameters, manage and control the
RoamAbout R1 and its ports, or monitor network conditions.
RI Management Navigation
The RoamAbout R1’s management interface includes four key pages – Setup, Status, Tools
and Help. The Status and Help pages provide general information on the current settings
and how to configure the RoamAbout R1. The Setup page is used to configure the LAN,
WAN and wireless interface, as well as other advanced functions. While the Tools page is
used to reset the RoamAbout R1, restore the factory settings, or upgrade firmware.
Once a configuration change has been made on a page, be sure to click on the Save button
located at the bottom of the page to save the new configuration change.
Setup Page Options
The Setup page allows you to configure TCP/IP settings and client services. Table 2-1
provides brief descriptions of the options.
Table 2-1: Setup Page
To ensure a proper screen refresh after a command entry, be sure that
Internet Explorer 5.0 is configured as follows: Under the page Tools /
Internet Options / General / Temporary Internet Files / Settings, the
setting for Check for newer versions of stored pages should be Every visit
to the page.
Setup Page Description
Change Password Sets the password for administrator access.
Set Time Zone Sets the local time zone.
LAN Sets the TCP/IP configuration for the RoamAbout R1 LAN
interface and all DHCP clients.
WAN Specifies the Internet connection type: DHCP host
configuration, fixed IP and gateway address, PPPoE
configuration, or dial-up modem.
NOTE