Specifications

5-5
Configuring APs in an Infrastructure Network
Using the RoamAbout R2 Console Port or Telnet Connection
1. Choose Network Configuration from the Main Menu.
2. Enter the parameters as described in Table 5-1.
3. Choose Save.
4. Choose Wireless Configuration from the Main Menu, then choose Set/Show
Wireless Configuration.
5. At the top of screen, choose the radio slot (1 or 2) to configure.
6. Enter the wireless parameters as described in Table 5-1.
7. Set the Reset Option to Reset Radio if necessary (default setting).
8. Choose Save.
To configure the RoamAbout wireless clients, write down the Wireless Network Name,
especially if Secure Access is enabled.
Using the RoamAbout R2 Web Interface
1. Open Network Configuration in the navigation tree.
2. Select Network Parameters in the navigation tree. Enter the parameters as described
in Table 5-1.
3. Click on Save.
4. Select Identification in the navigation tree. Enter the identification information.
5. Click on Save.
6. Open Wireless Parameters in the navigation tree.
7. Select the slot to configure. Enter the parameters as described in Table 5-1.
8. Click on Save.
To configure the RoamAbout wireless clients, write down the Wireless Network Name
especially if Secure Access is enabled.