Specifications

Index-9
Index
S
S1 button 7-18
Secure Access
configuring 6-4
description 2-14
infrastructure network 5-3
integrity test 5-33
modifying 5-22
with wireless network name 2-4
secure HTTP 2-22
security
description 2-14
determining for ad-hoc network 6-2
determining for infrastructure network 6-2
determining for LAN-to-LAN network 6-2
for AP 2000 console port 2-21
managing APs 6-3
semi-open environment A-2
Set Exclude SNMP setting 6-7, 6-25
Set Exclude Unencrypted setting 6-7
Setup/Add New AP button
infrastructure network 5-4
point-to-multipoint network 5-14
point-to-point network 5-9
SHA1 2-22, 6-23
shared secret 2-16, 6-11, 6-16
Show Current Settings command 5-17
Show Wireless Configuration command 5-17
signal level
description 2-9
ranges A-2
Signal to Noise Ratio
See SNR
signature algorithm
description 2-22
Site Monitor
description 7-5
testing coverage areas 7-5–7-6
SNA filter 5-30
SNMP
management tools 4-5
MIBs 2-31
RMON 7-10
SNMP community names
See read/write community name
See read-only community name
SNMP trap 8-26
SNMPv1
community names 2-20
configuring R2 6-8
support for 4-5
SNMPv2c
community names 2-20
configuring R2 6-8
support for 4-5
SNMPv3
configuring R2 6-8
RADIUS Management Authenticator 6-9
support 2-21
support for 4-5
SNMPv3 Authentication password
infrastructure network 5-2
point-to-multipoint network 5-12
point-to-point network 5-7
SNMPv3 Privacy password
infrastructure network 5-2
point-to-multipoint network 5-12
point-to-point network 5-7
SNR
AP placement 7-6–7-7
description 2-9
in ad-hoc network 7-3
outdoor antenna placement 7-7
testing communications quality 7-2–7-3
testing data throughput 7-4
Spanning Tree
description 1-12
infrastructure network 5-3
point-to-multipoint network 5-13
point-to-point network 5-8
R2 MAC address 2-5