Specifications

7-17
Upgrading the RoamAbout AP Firmware
Using the RoamAbout R2 Console Port or Telnet
1. Make sure that you have properly configured a BootP/TFTP server.
2. Choose Reset/Upgrade from the Main Menu.
3. Choose Upgrade Flash.
4. Enter the following:
Image Path: If using NetRider Loader, only enter the filename. Otherwise, enter the
path to the image file relative to the TFTP server’s local root directory. For example:
c:\rmabt\image\filename.z
TFTP Server IP Address: IP address of the TFTP server where the image file is
stored.
Download Type: Choose Application if upgrading the AP firmware, or Boot ROM
if upgrading the BootROM.
5. Choose Apply. You are asked to confirm the upgrade.
Using the RoamAbout R2 Web Interface
1. Open Reload / Reset in the navigation tree and select Reload.
2. Enter the following:
Image Path: If using NetRider Loader, only enter the filename. Otherwise, enter the
path to the image file relative to the TFTP server’s local root directory. For example:
c:\rmabt\image\filename.z
TFTP Server IP Address: IP address of the TFTP server where the image file is
stored.
Firmware Image: Select Operational Firmware if upgrading the AP firmware, or
Boot ROM if upgrading the BootROM.
3. Select Save to start the reload.