Specifications

6-19
Configuring for Rapid Rekeying
Using the Access Point 2000 Console Port
1. Choose Module-Specific Options from the Installation Menu.
2. Choose Authentication Options.
3. Choose Configure Wireless Authentication Type.
4. Choose 802.1X Authentication with Rapid Rekeying.
5. Enter the 802.1X activation key, then enter the 802.1X parameters as described in
Configuring the AP for Authentication on page 6-11.
6. Choose Configure Rapid Rekeying Parameters from the Authentication Options
menu.
7. Enter the Rapid Rekeying parameters.
8. Choose Save. There is no need to reset the AP.