Specifications

Configuring the AP for Authentication
6-10
Using the AP Manager
To enter a custom RADIUS Management Authenticator, perform the following steps:
1. Click on the Authentication button in the RoamAbout AP Manager main window.
2. Click on the Change Authenticator button. The RADIUS Client Management
Authenticator dialog box displays.
3. Click on the Custom radio button.
4. Enter the Custom Authenticator. The format is 16 printable ASCII characters, or 32
hexadecimal digits preceded by 0x.
5. Click on OK.
After you enter a custom authenticator, you are prompted to enter a password. Once
you set the password, only those with the password can access the custom RADIUS
authenticator. If this is the first time entering a Custom Authenticator, the RADIUS
Client Management Password dialog box displays.
6. Enter the New Password.
7. Enter the password in the Confirm New Password field.
8. Click on OK.
To change the password using AP Manager, perform the following steps:
1. Click on the Change Password button in the Authentication dialog box.
2. Enter the RADIUS Management Authenticator password in the Old Password field.
3. Enter the new password in the New Password field, and in the Confirm New
Password field.
4. Click on OK.
Using the Access Point 2000 Console Port
To enter a custom RADIUS Management Authenticator, perform the following steps:
1. Choose Module-Specific Options from the RoamAbout AP Installation Menu.
2. Choose RADIUS Client Options. The RADIUS Client Options menu displays.
3. Choose Configure RADIUS Client Parameters.
4. Choose Enter RADIUS Client Management Authenticator
to enter a custom AP
RADIUS Management Authenticator
. The format is 16 printable ASCII characters, or
32 hexadecimal digits preceded by 0x.