Specifications

6-7
Setting Encryption
Using the Access Point 2000 Console Port
1. Choose Module-Specific Options from the RoamAbout AP Installation Menu.
2. Choose Set Encryption Configuration.
3. Enter the encryption parameters as described previously. The Set Exclude
Unencrypted setting, when enabled, prevents the AP from communicating with
clients that do not use encryption.
4. To prevent any management tool using SNMP, including the AP Manager, from
changing the encryption parameters, enable the Set Exclude SNMP menu option.
5. Choose Reset with Current Settings from the Installation Menu. You do not need to
reset the AP if you only add, delete, or modify keys, or change the transmit key. Allow
approximately one minute for the AP to reset and complete its self-test.