Specifications

Setting Encryption
6-6
Using the RoamAbout R2 Console Port or Telnet
1. Choose Wireless Configuration from the Main Menu.
2. Choose Encryption Configuration.
3. Choose the slot to configure.
4. Enter the encryption parameters as described previously. The Exclude Unencrypted
setting, when enabled, prevents the AP from communicating with clients that do not
use encryption.
5. Reset Option: Set to Reset Radio if necessary (default setting).
6. Choose Save.
7. Choose Reset/Upgrade from the Main Menu, then choose Reset Switch. You do not
need to reset the AP if you only add, delete, or modify keys, or change the transmit key.
Allow approximately one minute for the AP to reset and complete its self-test.
Using the RoamAbout R2 Web Interface
1. Open Encryption in the navigation tree.
2. Select Slot 1 or Slot 2.
3. Enter the encryption parameters as described previously. The Deny Non-encrypted
Data setting, when checked, prevents the AP from communicating with clients that do
not use encryption.
4. Click on Save.
5. To implement your changes, select Reset under Reload/Reset. Select Reset with
Current Settings. You do not need to reset the AP if you only add, delete, or modify
keys, or change the transmit key. Allow approximately one minute for the AP to reset
and complete its self-test.