Specifications

5-17

Viewing Current AP Settings

You can view the current settings before you modify the RoamAbout AP parameters.

• AP Manager

Select the AP from the Managed List field and click on the various buttons, such as

Wireless Parameters, Network Parameters, and Hardware. In the Wireless

Parameters dialog box, click on the Advanced button to view all the wireless

parameters.

• RoamAbout R2 Console or Telnet

— Choose Current Configuration from the Main Menu to view the network and

hardware parameters.

— To display the current wireless settings, choose Wireless Configuration in the

Main Menu, then choose Set/Show Wireless Configuration. If you have changed

a wireless parameter but not yet reset the AP, the new setting is NOT reflected in

this display.

• RoamAbout R2 Web Interface

Open Network Configuration in the navigation tree. Select Network Parameters or

Identification in the navigation tree to view the network parameters. Open Wireless

Parameters in the navigation tree to view the wireless parameters.

• Access Point 2000 Console

— Choose Show Current Settings from the Installation Menu to view the network

and hardware parameters.

— To display the current wireless settings, choose Module-Specific Options then

choose Show Wireless Configuration. If you have changed a wireless parameter

but not yet reset the AP, the new setting is NOT reflected in this display.