Installation guide

RoamAbout 5.8 GHz 10 dBi Omni-Directional Antenna

A-12 Specifications

RoamAbout 5.8 GHz 10 dBi Omni-Directional Antenna

PartnumberRBTES‐AH‐M10M.

Note: This antenna can only be used with the RBT-4102, and the RBT-4102-LIC, in North America.

Table A-11 5.8 GHz Omni-Directional Antenna Specifications

Specification Value

Electrical

• Frequency Range 5.725–5.875 GHz

•Gain

Omni cut plane gain measurement over the

frequency band

10 dBi +/- 1 dBi

• Polarization Vertical

• Nominal Impedance 50 Ohms

• Undulation Ratio in the Horizontal Plane 2.4 dBi (Typ)

• -3 dBi Beamwidth in the Vertical Plane 8.5 degrees +/- 0.5 degrees

• Cross Polarization Level in Horizontal and

Vertical Planes

Greater than 23 dBi

• VSWR 1.5 Max (Normal and icing conditions)

• Maximum Power 20 Watts

Mechanical

• Wind-loading (in accordance with the

Enterasys 300 019-1-4.4.1E)

200.00 km/h (125 mph)

• Height 394 mm (15.5 in.)

• Weight 134.000 g (.295 lb)

Mounting Mast or wall mounting

Termination Reverse-N Male

Environmental

Temperature

• Stationary -40 to +55 °C (-40 to 131 °F)

• Cyclic -40 to +55 °C (-40 to 131 °F)

Rate 0.5 °C/minute

• Humidity (Stationary) 93% @ 30 °C (86 °F)

• Vibration (Sinusoidal) +/- 3 mm / 10 m/s

• Shocks 250 m/s