Installation guide

Mounting the Antenna
3-26 Antenna Installation
Toattachthemastbracketstotheantennabracket,performthefollowingsteps:
1. Insertthecarriageboltsfromtheflatsideofoneofthemastbracketsthroughthesquareholes
untilthecarriageboltheadisflushagainstthebracket.
2. Attachtheflatendofthismastbrackettotheantenna
bracket(oppositetheendthatyou
determinedyouwillattachtotheantenna)asfollows:
a. OrientthemastbracketsothattheV‐endsareonthetopandbottom.
b. Lineuptheflatsideofthemastbracketflushagainsttheantennabracketsothatthe
carriageboltheadsare
sandwichedbetweenthetwobrackets.
c. Inserteachofthefoursilverscrewsfromtheantennabracketsideandsecurethetwo
bracketswithlockwashersandnutsthreadedontothescrewsfromthemastbracketside.
3. Attachthesecondmastbrackettothefirstmastbracketasfollows:
a. Orientthemastbracket
sothattheV‐endsareonthetopandbottomfacingtheothermast
bracket
b. Insertthecarriageboltsthroughthesquareholesinthemastbracket
c. Securethemastbrackettothecarriageboltwiththe(yellow)lock‐washersandnuts
threadedfromtheflatsideofthemastbracket.