Installation guide

Mounting the Antenna

3-24 Antenna Installation

3. Situatetheantennabracketagainsttheantenna,sothattheendagainsttheantennapivotsin

thesameplaneasthedesiredpolarization.Forexample,ifusingverticalpolarization,this

antennabracketendshouldpivotupanddown.Ifusinghorizontalpolarization,thisantenna

bracketendshouldpivotfromside‐to

‐side.

4. Usethefour(yellow)hexnuts,tosecuretheantennabrackettothebackoftheantenna.

5. Rotatethepivotofthebracketendattachedtotheantennatoadjusttheantennaposition.

Lockbracketindesiredpositionbytighteningnutsoneithersideofbracketendwith

wrenches.

Mounting the Antenna to a Wall

Figure 3‐12illustrateshowtoatt achthe5.8GHzpanelantennatoawall.Table 3‐11liststhe

componentsforthisprocedure.

Figure 3-12 Mounting the RoamAbout 5.8 GHz Panel Antenna to a Wall

Table 3-11 RoamAbout 5.8 GHz Panel Antenna Wall Mounting Components

# Component

1 Antenna (RBTES-AH-P23M)

2 Antenna bracket

3Wall

4 Screw holes in wall

5 Screws for attaching antenna to the wall (user supplied)