Installation guide

Mounting the Antenna

RoamAbout Antenna Site Preparation and Installation Guide 3-23

3. Obtaintheproperscrewstosecuretheantennabracket tothiswallsurface.

Attaching the Antenna Bracket to the Antenna

Figure 3‐11illustrateshowtoatt achtheantennabrackettothe5.8GHzpanelantenna.Table 3‐10

liststhecomponentsforthisprocedure.

Figure 3-11 Attaching Antenna Bracket to RoamAbout 5.8 GHz Panel Antenna

Toattachtheantennabrackettotheantenna,performthefollowingsteps:

1. Placetheantennasothatthesidewithscrewholesisfacingup.

2. Usethepolarizationlabel

ontheupperleftcorneroftheantennatoorienttheantennawith

thecorrectpolarization.

Note: This antenna does not ship with screws for attaching the antenna bracket to a wall.

Table 3-10 RoamAbout 5.8 GHz Panel Antenna Bracket Mounting Components

# Component

1 Antenna bracket

2 Antenna (RBTES-AH-P23M)

3 Screw holes to attach bracket to antenna

4 Screws to attach bracket to antenna

5 Label showing direction of antenna vertical polarization