Installation guide

Lightning Protector Installation
RoamAbout Antenna Site Preparation and Installation Guide 3-5
ToinstalltheRoamAboutLightningProtector,performthefollowingsteps:
1. DetermineasuitablelocationfortheLightningProtectorasdescribedinChapter 2.
2. Uselockwasherandhexnuttosecurering‐terminaltothelongerofthethreadedendsofthe
LightningProtector.
3. Connectground‐wiretoringterminal.
4. Connectthelonger
threadedendoftheprotectortoaReverse‐NFemalecableconnectedtoa
RoamAboutAccessPoint.
5. ConnecttheshorterthreadedendoftheprotectortoaReverse‐NFemalecableconnectedto
theantenna.
Caution: To avoid damage to the RoamAbout equipment, always install the RoamAbout Lightning
Protector between the outdoor antenna installation and the RoamAbout AP or other computing
device connected to the outdoor antenna.
Precaución: para evitar daños a los equipos RoamAbout, debe asegurarse de instalar el
pararrayos RoamAbout Lightning Protector entre la antena para exteriores y el RoamAbout AP o
cualquier otro dispositivo electrónico conectado a la antena.
Achtung: Zum Schutz der RoamAbout-Ausrüstung ist der RoamAbout-Blitzableiter zwischen der
Außenantenne und dem RoamAbout AP oder sonstigen an die Antenne angeschlossenen
Computergeräten zu installieren.