Installation guide

Upgrade Firmware
F-4
11. Click Yes in the Poll dialog box to start the poll. You will receive a “Reload Status =
Success” message when the upgrade is complete. The upgrade takes approximately
one minute. AP Manager prompts you to reset the unit after the upgrade is complete.
12. Click Yes to reset the unit.
Using Web Management
1. Manually launch the NetRider Loader, go to the Program Files/RoamAbout/Manager
directory and double-click on the Loader.exe file, or start the TFTP server that you
want to use.
2. Click on the Reload/Reset folder in the R2 Manager management tree.
3. Click on the Reload page.
4. Enter the path to the latest G*.Z file for firmware upgrades, or the B*.BIN file for
BootROM upgrades.
5. Enter the TFTP Server IP address of the system running NetRider Loader, or your
TFTP server’s IP address in the TFTP Server IP Address field.
6. Select the type of firmware image being loaded from the Firmware Image drop-down
menu:
— Select Operational Firmware (for firmware upgrades)
— Select BootROM (for BootROM upgrades)
7. Click on Save to start the reload. Wait until the download status displays that the
download is complete before rebooting or power cycling
.
8. Click on the Reload/Reset folder in the R2 Manager management tree.
9. Click on the Reset page.
10. Under Reset R2 Platform, click on Reset with Current Settings.
CAUTION: The NetRider Loader application only indicates when the file
copy is completed, it does not indicate when the upgrade is complete.